This set contains a Speedball handle
with 5 cutters, styles 1, 2, 3, 5, and 6.
The end of the handle twists off
for convenient storage of cutters inside.

$10.70

This set contains two Speedball handles
and one each of styles 1, 2, 3, 4, 5, and 6.
The ends of the handles twists off
for convenient storage of cutters inside.

$15.16

A full set of replacement Cutters
Handel not included

$8.10

(Pkg of 2) No. 1 Small V Nibs

$3.46

(Pkg of 12) No. 1 Small V nibs

$16.28

(Pkg of 2) No. 2 Large V Nibs

$3.46

(Pkg of 12) No. 2 Large V Nibs

$16.28

(Pkg of 2) No. 3 Small U Gouge

$3.46

(Pkg of 12) No. 3 Small U Gouge

$16.28

(Pkg of 2) No. 4 Square-Gouge Nibs

$3.46

(Pkg of 12) No. 4 Square Gouge Nibs

$16.28

(Pkg of 2) No. 5 Large U-Gouge Nibs

$3.46

(Pkg of 12) No. 5 Large U-Gouge Nibs

$16.28

Hard plastic comfort grip handle with a hand-adjustable metal chuck making it easy to install and change cutters. End of handle twists off for convenient storage of cutters inside handle. Speedball linoleum cutter handles are available in Burgundy, blue, green and yellow.

$4.23

Hard plastic comfort grip handle with a hand-adjustable metal chuck making it easy to install and change cutters. End of handle twists off for convenient storage of cutters inside handle. Speedball linoleum cutter handles are available in Burgundy, blue, green and yellow.

$4.23

Hard plastic comfort grip handle with a hand-adjustable metal chuck making it easy to install and change cutters. End of handle twists off for convenient storage of cutters inside handle. Speedball linoleum cutter handles are available in Burgundy, blue, green and yellow.

$4.23

Hard plastic comfort grip handle with a hand-adjustable metal chuck making it easy to install and change cutters. End of handle twists off for convenient storage of cutters inside handle. Speedball linoleum cutter handles are available in burgundy, blue, green and yellow.

$4.15

This is the best Tranfer Paper
For tracing the Pattern on a Real and Foam Pumpkins.

$12.59

This is the best Tranfer Paper
For tracing the Pattern on a Real and Foam Pumpkins.
or Windowkins.

$12.59

This is the best Tranfer Paper
For tracing the Pattern on Foam Board. for Windowkins
Yellow or White works Best.

$12.59

This is the best Tranfer Paper
For tracing the Pattern on a Real and Foam Pumpkins.
Blue works Best.

$12.59

This is the best Tranfer Paper
For tracing the Pattern on a Real and Foam Pumpkins.
Blue works Best.

$12.59

Also Made By Saral

Same as Above
But these are Grey (graphite) and comes in Larger Sheets
Best to use for Large JUMBO Pumkin Carves

$17.73

#15 Key Hole Saw Blades are used
to Cut-Out sections of Real pumpkins

ONLY Fits X-Acto #2 Knife Handle (BELOW)

$9.15

A 5" long aluminum Handle with a #2 blade.
You Need this Handel for the #15 Keyhole Saw Blades (ABOVE)

$5.76

The X-Acto Heavy-Duty Knife features a thick, heavy-duty base
that offers stability and comfort during extended carving sessions.

This Handle Works for the #15 Keyhole Saw Blades (ABOVE)

$8.37

A 4-1/4" plastic grip handle with a #19 blade.
This Handle Works for the #15 Keyhole Saw Blades (ABOVE)

$8.26

Rubberized comfort grip,
Center-barrel blade release for fast and easy blade changing.
release, and anti-roll wedge.

$9.19

These Fit the X-Acto X2000
A safety dispenser is extremely useful for hobbyists, artists, and graphics professionals who need to keep a small stock of replacement blades safely on hand. Includes 15 blades. - #11

$6.98

I use this on Both Foam and Real Pumpkins
It's use is pop out the Small pieces of Pumpkin

$3.84

Same as above with wooden handel

$2.27

Diameter 3/16"
Length 5 3/4"

Sharp, polished wood and steel hole cutters
provide an easy method for cutting clean holes in real Pumpkins.
Can also be used for creating designs.

$5.15

Diameter 1/4"
Length 5-5/8"

Sharp, polished wood and steel hole cutters
provide an easy method for cutting clean holes in real Pumpkins.
Can also be used for creating designs.

$5.19

Diameter 1/2"
Length 6-1/2"

Sharp, polished wood and steel hole cutters
provide an easy method for cutting clean holes in real Pumpkins.
Can also be used for creating designs.

$5.75

Use this Fixative To Spay over The Pumpkin after using Tranfer Paper
If you want to use transfer paper, But Don't want to carve the pumpkin right away. After you Transfer the pattern
Spay Over with The Fixative,
The Pattern will now stay on the Kin
until your ready to carve it. Days Later no Smudging !

$7.45

Best Glue for Glueing Pattern to foam Pumpkins

Let Soak for 20 minutes in warm water
And the Pattern Comes off so Easy !

$3.00

Best White Glue for Glueing Pattern to foam Pumpkins

Let Soak for 20 minutes in warm water
And the Pattern Comes off so Easy !

$1.70

Best White Glue for Glueing Pattern to foam Pumpkins

Let Soak for 20 minutes in warm water
And the Pattern Comes off so Easy !

$18.32

The economical classroom pack contains
thirty .24 oz (7 g) sticks.Classroom Pack of 30

$17.95

Mistakes Happen, Glue a Pumpkin Peice back on with this Glue
Works for REAL and FOAM Pumpkins.

Krazy Glue Color Change goes on purple but dries clear
so it's easy to see where you're applying it.

$4.50

ast Drying - Need to Glue a pattern and Carve it Quick
Use this Tacky Glue

$3.48

These are Great for Spreading Glue
You Put the Glue on the top of the back of the pattern
use one of these sticks to drag the glue down
this will give you a nice even coat of glue.

$8.10

Kemper Ribbon Tools Are the Best
for cleaning up/Smoothing Out the Shaved Area's
of your 3 Tone Carving

$4.65

Kemper Ribbon Tools Are the Best
for cleaning up/Smoothing Out the Shaved Area's
of your 3 Tone Carving

$4.65

Kemper Ribbon Tools Are the Best
for cleaning up/Smoothing Out the Shaved Area's
of your 3 Tone Carving

$4.65/h1>

Kemper Ribbon Tools Are the Best
for cleaning up/Smoothing Out the Shaved Area's
of your 3 Tone Carving

$4.65

Kemper Ribbon Tools Are the Best
for cleaning up/Smoothing Out the Shaved Area's
Of your 3 Tone Carving

$4.49

Same as above
But used to smooth out Smaller Shaded Areas

$13.25

The Clay Loop is the Best Tool
to Thin Out the Walls of the Pumpkin
I also use to to clean All the walls after Gutting
This Pear Shaped one works Best !

$3.77/h1>

The Clay Loop is the Best Tool
to Thin Out the Walls of the Pumpkin
I also use to to clean All the walls after Gutting

$3.77

The Clay Loop is the Best Tool
to Thin Out the Walls of the Pumpkin
I also use to to clean All the walls after Gutting

$3.96

The Clay Loop is the Best Tool
to Thin Out the Walls of the Pumpkin
I also use to to clean All the walls after Gutting

$7.25

I use these little Cheap wood Chisels
to help with the Shading Process
These are Great to remove the pumpkin skin.

$9.33

Same Use As Above - For the Professional Carver
These Chisels are more High End and better Made

$50.26

Many of these tools work great for Real Pumpkin Carving.

$26.94

The kit includes: a straight gouge, a short bent
a parting chisel, a skew chisel, and a straight chisel.

$55.00

Many carvers like to Use the Hot Knife
for cutting cut-out patterns in foam pumpkins

$36.21

3M Scotch-Blue Painter's Tape for Delicate Surfaces
3/4" x 60ydI use this tape for taping the pattern to Foamboard for windowkins,

$5.81

Used for Windowkins
Pkg of 10
Thickness - 3/16"
Size 20"X 30"

$47.50

Used for Windowkins
Pkg of 10
Thickness - 3/16"
Size 32" X 40"

$60.19

Used for Windowkins
Pkg of 25
Thickness - 3/16"
Size 32" X 40"

$192.95